 
V-100 Voice Dialler - 4 programmable alarm inputs (can be set as Normally Open NO or Normally Closed NC) - 4 voice messages, each message for one alarm input (voice message length 10 seconds) - Up to 6 telephone numbers can be programmed. Some or all of the programmed telephone numbers can be assigned to each alarm input. For example, telephone numbers 2, 3 & 5 can be assigned to alarm input 1, telephone numbers 1, 3, 4 & 6 to alarm input 2, all telephone numbers to alarm input 3 and only telephone number 5 to alarm input 4. - The system will dial the telephone numbers assigned to an alarm input when it is triggered. Voice message will be repeated for 40 seconds. V-100 will dial the telephone number, it will play the voice message for 40 seconds, it will hang up, it will dial the next number, it will play the voice message. It will follow the same procedure with the telephone numbers assigned to an alarm input. - Possibility of viewing programmed telephone numbers on display, alarm input setup, play voice messages… Possibility of reset of the system to factory default in order to reprogram the system. - Setup is saved in EEPROM, setup is not deleted in case of power supply failure. - Size: 154 x 116 x 46 mm Download leaflet
| 
